Jacket fire hose for fire trucks

DSP Fire Hose Coupling (Demi-Storz Pompier, for fire fighting vehicle),Countries such as Côte d'Ivoire, Senegal, Mali, Burkina Faso, Cameroon, Gabon, the Republic of the Congo, Madagascar, and Togo almost exclusively require French-style couplings for the fire trucks and sanitation vehicles they procure.

The HOWO 4x2 emergency water fire rescue truck is built on a SINOTRUK HOWO 4×2 chassis with a 3800 mm wheelbase. It runs on a YC4E140-33 engine rated at 140 HP with a manual transmission. The truck carries a 4000L water tank and a 2000L foam tank. A CB10/30 pump (30 L/s at 1.0 MPa) and a roof mounted PS30 monitor (30 L/s, water ≥55 m, foam ≥42 m) handle fire suppression. A PH32 foam proportioner (3%-6% mixing ratio, 8-32 L/s flow range) automatically mixes foam concentrate with water. Standard gear includes hoses, suction tubes, couplings, foam gun, and basic tool kit.

The Fire Truck Foam Cannon PL24 is a high-efficiency firefighting device for medium- and long-range fire suppression, featuring high flow rate, long range, and stable spray. PL24 fire monitor can switch between direct current and spray modes, improving fire suppression efficiency while maintaining a safe distance, meeting various firefighting needs.

The SINOTRUK HOWO TX foam fire tanker is powered by a 350 HP MC07H.35-60 engine on a 4×2 chassis. It features a 6000L water tank and a 2000L foam tank, a CB10/60-RS fire pump (60 L/s), and a PS60 monitor (60 L/s, water ≥70m, foam ≥65m). Standard gear includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit. A PH64 foam proportioner (3%-6% mixing ratio, 64 L/s max flow) is also equipped for automatic foam mixing.

The Fire Truck Foam Cannon PL48 is a manual fire monitor that can spray both foam and water. It has a rated flow rate of 48 L/s, a rated pressure of 0.8 MPa, a water spray range of ≥70 m, and a foam spray range of ≥60 m. The monitor can rotate 360° horizontally and has an elevation angle of -30° to 70°, offering flexible operation.

The HOWO TX multiple powder pumper fire engine is built on a SINOTRUK HOWO 6×4 chassis with a 4350+1350 mm wheelbase. It is powered by a Weichai WP10.340E32 engine rated at 340 HP and paired with an HW 10 speed transmission. The vehicle carries a 3000L water tank and a 3000L dry powder tank. A CB10/80 fire pump (80 L/s at 1.0 MPa) and a roof mounted cannon (45 L/s, 65 m range) handle fire suppression. Nine 80L nitrogen bottles at 15 MPa drive the dry powder system.

IVECO 3850L 4×4 foam fire truck is driven by a 240 HP TECTOR F4EE681B engine with a 4×4 chassis that handles rough terrain with confidence. Total capacity is 3,850L—3,500L water and 350L foam. The Godiva P2 2010 pump delivers 2,000 L/min at 10 bar and 250 L/min at 40 bar, while the roof-mounted Szczesniak monitor reaches 60m with water and 55m with foam. Comes standard with hoses, suction line, fittings, foam gun, and tool kit. Built for industrial sites, rural roads, and demanding fireground operations.

The Howo TX 4x2 7.5 cubic meter foam fire truck uses the Howo TX chassis with a 4700mm wheelbase. It is equipped with a Weichai WP4.6NQ240E62 engine and a Sinotruk HW95508STCL gearbox. The front of the superstructure is an equipment box for storing auxiliary firefighting equipment. The middle section contains a 5.5 cubic meter carbon steel water tank and a 2 cubic meter stainless steel foam tank. The rear pump room is equipped with a CB10/40-LC(BS) fire pump, control panel, firefighting equipment, PL8/32 fire monitor on the tank top, and two European standard manholes.