The ISUZU GIGA Heavy-Duty Water Tender is a versatile special-purpose vehicle that integrates firefighting and environmental maintenance capabilities. Built on the ISUZU GIGA 6×4 chassis, it is powered by a 420HP engine and features a massive 16,000L water tank. Equipped with a professional CB10/60 fire pump and a PS8/50W fire monitor with a range of 65 meters, the vehicle boasts a comprehensive water-spraying system, including front flushing, rear sprinkling, and side spraying

The Howo NX 290hp RHD fire sprinkler truck features a right-hand drive extended cab, a 7.5 cubic meter fire water tank made of carbon steel, a CB10/40-XZ fire pump at the front of the tank, a PS8/40W fire monitor on the top, a KDP80B(L)(E) diesel water pump unit on the left rear, front and rear spray nozzles, pump inlet and outlet valves, and combines firefighting and water spraying functions. The cab is equipped with a long row of warning lights, left and right turn indicators at the rear, a ladder, and storage boxes on both sides of the tank.

SUZU NPR 190HP water pumper rescue truck is built around a 4×2 ISUZU chassis and powered by a 4HK1-TCG61 diesel engine making 190 HP. Behind the cab sits a 4,000 liter water tank. The rear pump room contains a CB10/40 fire pump rated at 40 L/s at 1.0 MPa. On the roof, a PS8/40 monitor shoots water up to 60 meters, turns a full 360°, and tilts from -35° up to 70°. Side compartments hold fire hoses, suction lines, couplings, wrenches, a foam gun, and a basic tool kit—everything needed for initial attack.

The HOWO 6000L water bowser pumper fire truck is built on a HOWO TX 350 4×2 chassis with a 4700 mm wheelbase. It is powered by a MC07H.35-60 engine rated at 350 HP and paired with a manual transmission. The vehicle carries a 6000L water tank. A CB10/60-RS fire pump (60 L/s at 1.0 MPa) and a roof mounted PS60 monitor (60 L/s, ≥60 m range) handle fire suppression. Standard equipment includes fire hoses, suction tubes, couplings, water/foam gun, and basic tool kit.

MAN 6×6 15,000L water fire truck is driven by a 400 HP D2066 LF06 engine with a 6×6 chassis built for off-road mobility and rough terrain. Water capacity is 15,000L. The CINAR 3000 N pump delivers 3,000 L/min at 10 bar and 250 L/min at 40 bar, while the rear-mounted CINAR monitor reaches 50m with water. Comes standard with hoses, suction line, fittings, and tool kit. Built for large-scale water supply, rural firefighting, and demanding operations where standard fire trucks cannot reach.

HOWO 6 CBM water fire brigade truck runs on a 350 HP MC07H.35-60 engine with a 4×2 chassis designed for stable urban response. Water tank capacity is 6,000L. The CB10/60-RS pump delivers 60 L/s at 1.0 MPa, while the roof-mounted PS8/40W monitor reaches 65m with water. Comes standard with hoses, suction line, fittings, and tool kit. Built for municipal firefighting, industrial facility protection, and emergency water supply where standard fire trucks cannot meet the flow demand.

The Isuzu FVZ GIGA 6 cubic meter foam fire truck is based on the Isuzu FVZ GIGA chassis, with a 4500mm wheelbase. It is equipped with an Isuzu 6HK1-TCG60 engine and a Fast 9-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains a 5000L carbon steel water tank and a 1000L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/40-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/32 fire monitor is located on the roof.

The SITRAK 8×4 18500L foam fire truck is built on a SITRAK ZZ5446V516MF1 8×4 chassis with a 1950+4600+1400 mm wheelbase. It is powered by an MC11.46-61 engine rated at 460 HP and paired with a manual transmission. The vehicle carries a 12000L water tank and a 6500L foam tank. A Hill CB10/150-8FC fire pump (150 L/s at 1.0 MPa) and a roof mounted Akron PLKD10/100B-5178 monitor (100 L/s, water ≥90 m, foam ≥85 m) handle fire suppression. Standard equipment includes fire hoses, suction tubes, couplings, foam gun, and basic tool kit.