
The Shacman 6×4 fire truck is a high-performance firefighting vehicle designed to handle various fire scenarios. With overall dimensions of 10060×2550×3650 mm, it is equipped with a WP10.380 engine delivering a maximum power of 280 kW and a top speed of 95 km/h. The vehicle features a 14,000-liter water tank and a 2,000-liter foam tank, along with a CB10/60 fire pump and a PL48 fire monitor, offering flow rates of 60 L/s and 48 L/s, respectively, with ranges of up to 65 meters (water) and 60 meters (foam). The body is constructed with high-quality steel and aluminum, featuring a double-row cabin and a multifunctional equipment compartment. Suitable for urban, industrial, and forest fire rescue operations, it combines efficient firefighting capabilities with excellent off-road performance.
Truck Model:
PT5340GXFPMTanker Structure:
Carbon steel and stainless steelWork capacity :
65 metersWheelbase:
4500+1350 mmAxle drive:
6×4Engine Power:
380 HPEngine Model:
WP10.380E32Fire Pump:
CB10/60Fire Monitor:
PL48, 48L/SRemark:
Water tank and foam tank capacity is adjustableThe Shacman 6×4 fire truck is a high-performance firefighting vehicle specifically designed to tackle various fire scenarios. It integrates advanced chassis technology, a powerful engine system, and efficient firefighting equipment. With exceptional off-road capability, stable handling, and high firefighting efficiency, it is an ideal choice for urban, industrial, and forest firefighting operations.
The Shacman 6×4 foam fire truck is equipped with two independent liquid tanks: a water tank and a foam tank. The water tank is made of high-quality carbon steel plate with anti-rust treatment and has a capacity of 14,000 liters. The foam tank is constructed from stainless steel plate with a capacity of 2,000 liters. This dual-tank design allows the vehicle to carry both water and foam fire suppressants, making it suitable for different types of fire scenarios. The fire pump, model CB10/60, delivers a flow rate of 60 L/s at a pressure of 1.0 MPa, enabling rapid delivery of large volumes of fire suppressants to control fires quickly. Additionally, the vehicle is equipped with a PL48 fire monitor, which supports both water and foam firefighting modes, with a flow rate of 48 L/s and ranges of up to 65 meters (water) and 60 meters (foam).
The body design of the Shacman 6×4 firefighting truck is tailored to meet the practical needs of firefighting operations. The pump room is located at the rear or center of the vehicle, housing the pump system and pipelines in a well-organized structure for easy operation. The equipment compartment, situated behind the cabin, features aluminum alloy roller shutters on both sides, interior lighting, and storage boxes for convenient access to firefighting tools. The body is constructed with high-quality steel and aluminum embossed sheets, ensuring durability and strength while reducing overall weight. The lightweight aluminum alloy roller shutters operate smoothly, provide excellent sealing, and produce low noise, further enhancing the vehicle's usability.
● China best fire engine truck factory
● More than 30 years professional manufacturer experience.
● Be designed according to your requirements
● We can offer your a good after-sell service
● We have strong professional design team
● Prompt delivery, any order is welcome.
Product Specifications
Vehicle Basic Parameter |
||
Product Name |
SHACMAN 6X4 Firefighting truck |
|
Overall Dimensions |
10060*2550*3650 mm |
|
GVW |
35000 kg |
|
Curb Weight |
15800 kg |
|
Approach/departure angle |
16°/11° |
|
Chassis Parameter |
||
Chassis Brand |
SHACMAN |
|
Chassis model |
SX5349TX |
|
Drive mode |
6×4 |
|
Cabin |
Double row, 2+4 seats |
|
Wheelbase |
4500+1350 mm |
|
Tire |
12.00R20, 10+1 pcs |
|
Speed |
95 km/h |
|
Engine |
Model |
WP10.380 |
Number of cylinders |
6 |
|
Displacement |
9726 ml |
|
Max. power |
280kW(380HP) |
|
Rated speed |
2200 rpm |
|
Max. torque |
1600 N.m |
|
Gearbox |
FAST 12-speed, manual |
|
Superstructure Parameter |
||
Tank Material |
Water Tanker |
High quality carbon steel plate, anti-rust treatment |
Foam tank |
Stainless steel plate |
|
Tank Capacity |
Total |
16000L |
Water Tank |
14000L |
|
Foam tank |
2000L |
|
Fire Pump |
Type |
Fire pump |
Model |
CB10/60 |
|
Flow |
60L/S @1.0Mpa |
|
Pressure |
1.0Mpa |
|
Fire Monitor |
Type |
For water and foam |
Model |
PL48 |
|
Flux |
48L/S |
|
Pressure |
1.0Mpa |
|
Range |
Water≥65m; Foam≥60m |
|
PTO |
Use sandwich PTO, splashing type lubricate, can put out fire when driving. |
|
Carriage |
Carriage is made of high-quality steel and Aluminum embossed sheet |
|
Pump room |
On the rear or central of truck, there are pump system and pipeline, reasonable structure. Easily operate all meters and |
|
Equipment room |
Located behind the cabin, with aluminum alloy roller shutters on both sides. It is equipped with interior lighting, and storage boxes are provided inside the equipment room as needed. |
|
Rolling shutter door |
Light and high-quality aluminum alloy rolling shutter door, neatly open and close, good seal, low noise. |
Product Applications
The Shacman 6×4 foam fire truck, with its powerful firefighting capabilities and versatile design, is suitable for a variety of fire scenarios. Below are the five most common fire scenarios it is used for:
1. Chemical Fires: Chemical fires often involve flammable liquids, gases, or chemicals, posing extremely high risks. The 2000-liter foam tank of the Shacman firefighting truck can store a large amount of foam firefighting agent, making it suitable for extinguishing oil and chemical fires. The foam agent effectively cuts off oxygen, suppressing the spread of fire.
2. Oil Depot and Storage Tank Fires: Oil depot and storage tank fires are often intense and prone to explosions. The foam firefighting system of the Shacman fire engine truck can effectively extinguish oil fires and prevent the spread of flames.
3. Airport Fires: Airport fires typically involve aviation fuel and aircraft materials, with flames spreading rapidly. The foam firefighting system of this fire tender truck can quickly extinguish fuel fires, while the water tank provides cooling and auxiliary firefighting functions.
4. Urban Firefighting: Urban fires include building fires, vehicle fires, and more. The water and foam tanks of the Shacman tanker fire truck can handle various types of fires, ensuring efficient firefighting in complex urban environments.
5. Industrial Fires: Industrial fires occur in factories, warehouses, and other facilities, often involving multiple flammable materials. The multifunctional firefighting system of the Shacman 6×4 fire tender truck can handle various types of fires, ensuring the safety of industrial sites.
Product Details
The pump room is located at the rear of the vehicle, with aluminum alloy roller shutters on both sides and the rear. It is equipped with interior lighting, and some commonly used equipment can be stored on both sides of the pump room.
The Shacman fire truck is equipped with two specifications of fire hoses: DN65 and DN80. They are properly stored on racks on both sides of the pump room, ensuring that firefighters can quickly access and deploy them.
The equipment compartment is located behind the crew cabin, with its interior lined with aluminum alloy tread plates. It can store tools such as hydrant wrenches, shovels, fire axes, rubber mallets, and more. These tools are secured with buckles to prevent them from falling out during driving.
The CB10/60 fire pump is installed in the pump room of the Shacman fire truck. The pump room is located at the rear of the vehicle, with an internal layout designed for easy operation and maintenance.
The top of both the water tank and the foam tank is equipped with a DN460 manhole cover, featuring a quick-locking/opening mechanism and an automatic pressure relief device.
The rear seats are equipped with headrests, seat belts, and breathing apparatus brackets, enhancing comfort and safety. They are suitable for fields requiring multiple occupants, such as power, oilfield, and mining exploration operations.